Original Arduino Uno R3 Rev3 – Made in Italy

Original Arduino Uno R3 Rev3 – Made in Italy is an original microcontroller board from Arduino officials based on the ATmega328P.  It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again. This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, Max MSP).The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). Revision 3 of the board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. </p> Stronger RESET circuit. Atmega 16U2 replace the 8U2. Specifications: Model Type: Arduino Uno R3 Microcontroller Chip: ATmega328P Operating Voltage: 5 V Input Voltage(Recommended): 7-12V Analog I/O Pins: 6 Digital I/O Pins: 14 (of which 6 provide PWM output) PWM Digital I/O Pins: 6 Clock Speed: 16 MHz Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328P) EEPROM: 1 KB (ATmega328P) DC Current for 3.3V Pin: 50 mA DC Current per I/O Pin: 20 mA On Board LEDs: Yes Operating Temperature (°C): -10 to 60 Weight (gm): 25 Length (mm): 68.6 Width (mm): 53.4 Height (mm): 12.5 Getting Started You can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics. Useful Links On the Software on the Arduino Forum On Projects on the Arduino Forum On the Product itself through our Customer Support Package Includes: 1 x Arduino UNO R3 – (Original Made in Italy)