FITENVITAALFRIESLAND.NL ≡ Vests & Chest Rigs Makeup Leds-Holders/Indicators Books
  • Rc Drones And Accessories

  • Electronic Speed Controller ESC 40A (Bidirectional)

Electronic Speed Controller ESC 40A (Bidirectional)

$47.13 $61.74
Electronic Speed Controller ESC 40A (Bidirectional) – OverviewThe Electronic Speed Controller (ESC) 40A (Bidirectional) is a high-performance motor controller engineered for brushless DC motors used in RC vehicles, drones, robotic platforms, and DIY electric projects. With a continuous current rating of 40A and support for forward and reverse operation, this ESC delivers precise speed control, efficiency, and robust protection features for demanding applications.Key FeaturesContinuous Current: 40A for sustained motor loadsBidirectional control enabling forward and reverse motionCompatibility with brushless DC motors (3-phase BLDC)PWM signal input with accurate throttle response and calibrationHigh-efficiency MOSFET-based power stage to minimize heatWide input voltage range (commonly compatible with 2S to 6S LiPo batteries depending on model)Built-in protective features: over-current protection, thermal protection, and low-voltage cutoffCompact and lightweight design for space-constrained buildsTechnical SpecificationsContinuous current: 40AMotor type: Brushless DC (3-phase)Control input: PWM (standard RC/servo signal)Voltage range: Typically 2S to 6S LiPo (confirm model-specific rating before use)Protections: Over-current, over-temperature, low-voltage cutoffCooling: MOSFET-efficient design; use additional cooling for prolonged high-load operationApplicationsRC cars and boats requiring forward and reverse controlMultirotor drones and quadcoptersElectric bikes, scooters, and light EV projectsRobotics platforms and motorized mechanismsDIY motor control systems and prototypesInstallation and WiringFollow safe wiring and installation practices to ensure reliable operation:Connect the three motor phase wires to the ESC motor outputs (A, B, C) and secure connections.Attach the battery supply leads observing correct polarity. Use an appropriate connector and fuse if needed.Connect the ESC signal lead to your receiver, flight controller, or PWM controller. Configure the neutral and endpoints per your controller instructions.Ensure good ventilation or add a heatsink/fan for sustained high-current use.Before first run, perform ESC calibration with your transmitter or controller to set throttle range and center point.Protections and Safe OperationOver-current protection prevents damage from stalls or excessive load.Thermal protection reduces power output or shuts down if temperatures exceed safe limits.Low-voltage cutoff protects battery health by preventing over-discharge.Always verify the ESC voltage rating against your battery pack to avoid permanent damage.Why Choose This ESCThis ESC balances power, efficiency, and safety for hobbyists and professionals. The MOSFET power stage provides lower heat and higher efficiency under load, while bidirectional control makes it ideal for vehicles that require reverse motion. Built-in protections reduce the risk of failure and extend component life.Quick TipsUse appropriately sized battery and wiring to minimize voltage drop.Allow airflow or active cooling during extended high-current runs.Keep firmware or controller settings updated and perform periodic checks for loose connectors.Frequently Asked QuestionsIs this ESC compatible with my brushless motor?Yes, it is compatible with most 3-phase brushless DC motors. Verify that the motor current and battery voltage are within the ESC’s rated limits.Can I use this ESC for an electric scooter or bike?It can be used for light electric bikes or scooters provided the motor current draw stays below 40A continuous and the system voltage is within the ESC’s supported range.Do I need a separate BEC or regulator?Some ESC models include a BEC or voltage regulator for powering receivers and controllers. Check the specific model details to confirm whether an external BEC is required.Note: Images are for illustration purposes only. Confirm model-specific specs and wiring diagrams before use. Categories: Boards, Modules and Accessories, RC Drones and Accessories Tags: Bidirectional ESC, Brushless Motor Controller, Drone ESC, Electronic Speed Controller 40A, ESC 40A, High Power ESC, Motor Driver ESC, RC Car ESC College Road Electronics4.85 (317 Reviews)
Rc Drones And Accessories

Rc Drones And Accessories

  • FPV Drone Power Module V2.0 with XT60 Connectors
    $42.46 $73.03
  • IMAX B6AC LiPo Battery Balance Charger 80W
    $40.9 $70.76
  • Brushless Motor BLDC 1400KV (A2212)
    $39.9 $65.83
  • F450 Quadcopter Drone Frame Kit
    $67.25 $82.05
  • 30A Electronic Speed Controller ESC for Brushless Motors
    $42.37 $69.06
  • KK 2.1.5 MXK Multi-Rotor Universal Flight Controller Board
    $37.59 $57.89
  • Servo CCPM Consistency Tester
    $64.97 $109.15
  • A2212 1000KV BLDC Brushless DC Motor
    $54.25 $69.44
  • IMAX RC B3 Pro Compact LiPo Battery Balance Charger
    $37.25 $65.19
  • Electronic Speed Controller ESC 40A (Bidirectional)
    $47.13 $61.74
  • 40A Electronic Speed Controller ESC for Brushless Motors
    $37.22 $54.71

© 2026 - FITENVITAALFRIESLAND.NL